Drive-Train Clean up – $45.00

  • Remove and degrease crankset, chain, cog set (freewheel),
  • Rear and front derailleurs along with all removable parts of the derailleurs (e.g., pulley wheels, B-pivot bolt, etc.)
  • Re-install components with new grease on threads and tighten to spec.

 

Basic Check (Tune-Up) – $65.00

  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Quick wipe down with bike cleaner of frame and wheels.
  • Adjustment and/or check tension of:  Bolts, Pedals, Wheel Quick Release – Brake sets and cables – Derailleurs and cables.
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – Lube all bolts and fasteners
  • Full gear test.

 

Basic Tune-Up – $100.00

  • Includes installation charge on all parts purchased from WheelBuilkdingParts excluding: tires,
    handlebar tape, rigid and suspension fork, bottom bracket, headset, and cartridge bearings in
    hubs and/or frame set)
  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Extensive cleaning of bicycle frame, wheels, and components followed by polishing of frame
  • Installation of new components (including cable and housing sets)
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release, wheel/crank/headset
    bearings -Brake sets and cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – lube all bolts and fasteners
  • Full gear test.

 

Full Tune-Up – $165.00

  • Includes installation charge on all parts
  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Extensive cleaning of bicycle frame, wheels, and components followed by polishing of frame
  • Removal/cleanings/repacking/reinstallation of wheel/crank/headset bearings (if cartridge
    bearings are utilized, either installation of new bearing or repacking of old bearing will occur)
  • Complete Drivetrain Clean – Remove and degrease crankset, chain, cog set (freewheel), rear
    and front derailleur.
  • Re-installation of components with new grease on threads and tighten to spec
  • Installation of new components (including cable and housing sets)
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release -Brake sets and
    cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – lube all bolts and fasteners
  • Full gear test.

 

Disassemble Overhaul $230.00

  • Includes installation of all parts
  • Removal/greasing/reinstallation of all parts from bicycle (including all bolts from threads)
  • Disassembly/cleaning/reassembly derailleurs and brake bodies
  • Extensive cleaning of bicycle frame, wheels, and components followed by polishing of frame
  • Removal/cleanings/repacking/reinstallation of wheel/crank/headset bearings (if cartridge
    bearings are utilized, either installation of new bearing or repacking of old bearing will occur)
  • Complete Drivetrain Clean – Remove and degrease crankset, chain, cog set (freewheel), rear
    and front derailleur.
  • Re-installation of components with new grease on threads and tighten to spec.
  • Reinstallation of all parts including new components (including cable and housing sets)
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – lube all bolts and fasteners
  • Full gear test.

 

Bike Assembly Full Build (Bare Frame) $165.00

Bike Assembly From Factory Box $75.00

 

Please don’t hesitate to contact us for any bike related assembly, repair, wheel issues, bearing
issues, creaking etc.

 

NO JOB IS TOO SMALL!

Phone: (818) 631-2655  |  Email: Click Here  |  Hours: Mon-Fri 8AM-5PM

Custom Bike Builds